Solder Wire

Hi, Friends as being an industrialist in the Electronic world everyone needs Solder Products and for a problem, I am trying to resolve it.

If we talk about Solder Products then several Products comes under it like Solder wire, Solder Paste, Solder Bar, Solder flux,

These are the basic name which everyone knows but if we come under the industrial use then the composition of the material is a great concern here the material use to compose the solder products are Copper, Silver, Lead, Tin. etc.





The composition of different material may be as:

Lead-free Solder Products

Sn99.3Cu0.7,  Sn99Ag0.3Cu0.7, Sn96.5Ag3.0Cu0.5

Leaded Solder Products

Sn63Pb37, Sn60Pb40, Sn55Pb45 etc.


Fastening filler materials are accessible in a wide range of composites for varying applications. In gadgets get together, the eutectic composite of 63% tin and 37% lead (or 60/40, which is practically indistinguishable in softening point) has been the combination of decision. Different composites are utilized for pipes, mechanical get together, and different applications. A few instances of delicate weld are tin-lead for general purposes, tin-zinc for joining aluminum, lead-silver for quality at higher than room temperature, cadmium-silver for quality at high temperatures, zinc-aluminum for aluminum and consumption opposition, and tin-silver and tin-bismuth for hardware.

An eutectic definition has favorable circumstances when connected to fastening: the liquidus and solidus temperatures are the equivalent, so there is no plastic stage, and it has the most reduced conceivable dissolving point. Having the most reduced conceivable liquefying point limits warmth weight on electronic parts during patching. What's more, having no plastic stage takes into account faster wetting as the weld warms up, and snappier setup as the patch cools. A non-eutectic plan must stay still as the temperature drops through the liquidus and solidus temperatures. Any development during the plastic stage may result in breaks, bringing about an untrustworthy joint.

 

For More information on Solder Proucts You can click on Solder Paste


Thanks For Giving your valuable TIme

SOLDER WIRE SUITABLE FOR LED LIGHTING INDUSTRY

Lead-free Solder Wire

The materials used in the lighting industry are aluminium, brass, galvanized parts, etc., and the welding requirements are higher. Solder Wire

hese special materials use solder wire?

A. The lamp cap is made of aluminium. It is harder to weld than brass and galvanized parts. It is recommended to use soldered aluminium solder wire.

B. Brass or galvanized parts can be welded in two ways:

1. The external liquid flux is sprayed and fired with a solid core solder containing about 30-40# of tin. The flux is completely vaporized during welding, and the residue is extremely small.

2. Select the solder wire with flux to weld. This solder wire is more commonly used. The solder wire produced by Yunfang Tin Industry is mature and the welding effect is good.

When you encounter the lighting industry, you need to understand the welding process and what products you decide, and then decide which method to use for welding and then send the appropriate samples.

for usb data cable plant click USB Data cable plant